iCOMS TMT & TMT-2 - Doppler Sensors for Overspeed Detection

Doppler Sensors for Overspeed Detection

The TMT & TMT-2 are two doppler sensors designed for vehicle overspeed detection. It allows for the use of one or two relays to regulate Vehicle Activated Signs, and traffic lights.


  • Detection up to 150 m (492’), 1 relay, setting per DIP-Switch


  • Detection up to 120 m (393.7’), 2 relays, setting per RS232 


Above Ground Technology

  • Safer for the traffic engineers, who can stay on the roadside for installation  
  • Less expensive: no roadwork nor traffic interruption needed for installation

Efficient Reliability

  • Frost, snow, fog, etc. have no influence on the radar’s performance
  • No lens to clean means no calibration


Easy to Install

  • Detachable cable at the rear 
  • Delivered ready to install, i.e. including cable, fixing support, screws and bolts 
  • Settings adjustable without radar opening 
  • Extended operating temperature: -40°C/+75°C (-40°F/+167°F)


  • Intersections
  • Warnings (VMS activation)
  • Wrong-way detection

Options - LP Version

  • Low power consumption for solar power, with open collector output for the TMT


Detection range:
(for a personal car, installation height : 4.5 m, tilt angle : 5°, sensitivity set on ¾)
- TMT:
Car: 150 m (492’) | Truck: 200 m (656.16’)
- TMT-2:
Car: 100 m (328.1’) | Truck: 150 m (492’)
Minimum detected speed:
- TMT:
30 km/h (18.64 mph)
- TMT-2:
5 km/h (3.1 mph)
Detection direction:
- TMT:
- TMT-2:
Approaching, receding or bidirectional
Speed range:
- TMT:
From chosen threshold up to 160 km/h (99.4 mph)
- TMT-2:
From chosen threshold up to 250 km/h (155.3 mph)
Dimensions 10-60 V power supply:
70 x 100 x 180 mm (2.75” x 3.93” x 7.08”)
Dimensions 220 V power supply:
- TMT:
70 x 100 x 248 mm (2.75” x 3.93” x 9.76”)
- TMT-2:
Weight (without cable & mounting support):
1 kg (2.2 lbs)
Environmental protection :
IP65, EN 50102 (IK)
Mounting system:
Double-L (supplied), adapted for M8
Operating temperature:
From -40°C to +75°C (-40°F to +167°F)
Power supply:
- TMT:
LV version: 10-42 VAC/10-60 VDC EU version: 220 VAC LP version: 6-20 VDC
- TMT-2:
LV version: 10-60 VDC
< 1 W (90 mA under 12 VDC)
K-band - 24.125 Ghz
Transmit power:
5 mW
User output:
- TMT:
Visible LED on front face – Inverted relay contact – DIP-switch
- TMT-2:
Visible LED on front face – 2 Inverted relay contacts – RS232
Hold time of the relay:
User configurable

Back to Products
Request Info

IRD is hiring Field Representatives. Learn more about field opportunities across North America on our Careers page.
Learn More >

IRD is proud to be a Silver Sponsor of Truckers Against Trafficking, an organization that exists to educate, equip, empower and mobilize members of the trucking and travel plaza industry to combat domestic sex trafficking.
Learn More >

Request Info