Products Sensors & Accessories Grouts & Epoxies PU200 Piezo Resin
PU200 Piezo Resin
PU200 is a two part resin (Polyurethane Resin and Polyurethane Hardener) developed for installing various types of sensors into the road, whether they are enclosed or are designed to go straight into the road. Approximately one resin kit is required for one 6 foot piezo film or cable sensor.
- Non toxic/hazardous
- Winter & summer grades available - works in below freezing conditions
- Flexible, resists cracking with wear
- Adheres to most surfaces
- Quick curing time, traffic ready in approximately one hour
- One kit per six foot sensor
Specifications:
Density:
Resin: 1.86
Hardener: 1.23
Combined: 1.74
Viscocity:
Resin: 550-700 poise at 20°c to 25°c
Hardener: 2-3 poise at 20°c to 25°c
Combined: 400-500 poise at 20°c to 25°c
Pot life: 8-15 min. at 15°c to 25°c (150g mass)
Set time: 10-15 min. at 15°c to 25°c (150g mass)
Full Cure time: 48 hours(15 lbs)
Peak exotherm: 60°c (150g mass)
Sure D hardness (24 hours at room temp): A: 75 B: 70 after 5 seconds
- Download the PDF version of the brochure (pdf - 230 kb)
(PDF files require Adobe Reader)
